Omron NT30C-ST141-E Operation Manual page 106

System Settings
To Stop the Buzzer Sound
Types of the Buzzer Sounds The following buzzer sounds can be set.
Setting the Buzzer
94
The buzzer sound can be stopped by the following operations.
• Control by the PC
• Switch the screen to a screen that does not have a buzzer attribute.
• Press the touch switch to which the buzzer stop attribute has been set.
• Turn ON the input terminal for expansion I/O for which a buzzer stop attribute
has ben set.
If a buzzer stop attribute has been set to a touch switch created on the screen in
which the buzzer attribute has been set, such touch switch can be used to stop
the buzzer sound. To set a buzzer stop attribute to a touch switch, set the
control key function for the touch switch by using the input key function.
For the touch switch setting, refer to 4-7 Touch Switches (page 154).
• Continuous sound: The buzzer continues to sound.
• Short intermittent sound: The buzzer sounds intermittently at 0.5 second inter-
vals.
• Long intermittent sound: The buzzer sounds intermittently at 1 second inter-
vals.
If two or more buzzer sound specifications are made from the PC at the same
time, the order of priority that determines that buzzer sound will be used is as
follows: (1) continuous sound → (2) short intermittent sound → (3) long intermit-
tent sound. If the continuous sound and short intermittent sound are specified at
the same time, the continuous sound takes priority.
Use the memory switches to set whether or not the buzzer sounds when the
buzzer sound has been instructed by the PC or with a screen attribute or when an
error has occurred.
The factory setting is ON, which means that the buzzer will sound when a com-
mand is received from the PC, when a screen for which the buzzer attributes is
set is displayed, and when errors occur.
Set the buzzer sound by the menu operation from the System Menu shown be-
low.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
Display History
I/O Check
PT Settings
Init. Memory
Select "Maintenance Mode."
Select "Memory Switch."
Memory Switch
Section 3-8