Omron NT30C-ST141-E Operation Manual page 141

Outline of Functions
Graphic Types and Their Attributes
* A continuous straight line with
On the NT30/30C, the following types of graphic can be entered and dis-
played:
Polylines
up to 255 middle points can be drawn.
Circle
Straight lines are available in the following four types:
Solid line
Broken line
1-dot chain line
2-dot chain line
Other graphics can be drawn only with a polyline.
S Filling
The areas of graphics within the outline (closed areas) can be filled in a tiling
pattern.
There are ten tiling patters, as shown below:
Name
Flat
Box
Slant left
Stripe
Diamond
S Color Display (NT30C Only)
Number of graphic frame colors: 8
Number of display colors (in filling): 8
The tiling pattern colors are display colors.
Number of background colors (in filling): 8 or transparent
The color visible between the blocks of the tiling pattern is the background
color. When transparent is selected, the display element under the graphic
appears to be transparent.
Number of outline colors (in filling): 8
Square
* A polygon with up to 255
vertexes can be drawn.
Arc
Designation of line types
Pattern Name
Slant right
Crosshatch
Grid
Border
Halftone
Section 4-2
Polygon
Fan
Pattern
129