Omron NT30C-ST141-E Operation Manual page 122

System Maintenance
Checking the Calendar and Time
110
Check the setting of the internal clock function by using the menu operation from
the System Menu shown below.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
Display History
I/O Check
PT Settings
Init. Memory
[ I/O CHECK MENU ]
Quit
Exp. I/O Unit
Touch Switch
Communication
LCD Display
< CALENDAR CHECK >
04/15/95 14 : 39 : 07
• When the check is finished, press the Quit touch switch. The I/O Check Menu
will be redisplayed.
• Calendar and clock setting can also be executed by performing the download
operation in "Date and Time" under "Connect" on the NT-series Support Tool,
or by using numeral memory table operations. For details on the setting proce-
dure when using the NT-series Support Tool, refer to the NT-series Support
Tool for Windows Operation Manual (V061), and for details on the setting pro-
cedure using numeral memory table, refer to 5-6 Clock Function (page 234).
Select "Maintenance Mode."
Select "I/O Check."
Memory Switch
Select "Calendar."
Next
Buzzer
LED
Calendar
Battery
Printer
Quit
Section 3-9