Installing A Cabled Hard Drive Into A Hard Drive Carrier - Dell PowerEdge R330 Owner's Manual

Figure 32. Removing a cabled hard drive from a cabled hard drive carrier
1. screw (4)
3. cabled hard drive carrier
Next steps
1. Install the cabled hard drive in the hard drive carrier.
2. Install the hard drive carrier into the slot.
3. Follow the procedure listed in
Related links
Removing a 3.5-inch cabled hard drive carrier

Installing a cabled hard drive into a hard drive carrier

Installing a 3.5-inch cabled hard drive carrier
Installing a cabled hard drive into a hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1. Ensure that you follow the
2. Follow the procedure listed in
3. Remove the hard drive carrier.
4. Keep the Phillips #2 screwdriver ready.
Steps
1. Insert the hard drive into the hard drive carrier with the connector end of the hard drive toward the back of the hard drive
carrier.
2. Align the screw holes on the hard drive with the screw holes on the hard drive carrier.
When aligned correctly, the back of the hard drive is flush with the back of the hard drive carrier.
3. Install the screws to secure the hard drive to the hard drive carrier.
72
After working inside your
Safety instructions.
Before working inside your
2. cabled hard drive
system.
system.