Table of Contents
Advertisement
7. Start-up
Settings
L Basic settings are made via the ETS (see application
description in the KNX manual).
L The presence detector supports KNX Data Secure.
For final start-up, thePixa Plug app is available. The BLE
module integrated in the presence detector allows many
functions to be called up or used directly with a smartphone
or tablet, such as creating a background image, editing zones,
calibrating brightness measurements, displaying statistics, etc.
In addition, each brightness measurement as well as the
integrated temperature measurement can be taught in. The
control commands can be used to change the behaviour
during operation.
L During start-up, the steps on page 5 "IMPORTANT ..."
must be carried out.
Programming mode
Programming mode can be activated either with the program-
ming button on the back of the presence detector or by using
thePixa Plug app (without dismantling the detector).
An activated programming mode is indicated on the front of
the presence detector as well as by the illuminated LED on
the programming button (back).
Resetting the presence detector to the factory
setting
The presence detector is delivered with a factory setting that
can be restored at any time.
Activate
Description
Power up
Hold down the programming button when the
bus voltage is switched on.
Switch-on behaviour
After connecting the bus voltage or downloading the para-
meters via the ETS, the detector is ready for operation after
approx. 1 s.
L Auxiliary voltage must be available.
8. Settings via thePixa Plug app
Connecting the presence detector with a mobile
device and thePixa Plug app
The presence detector can be controlled via Bluetooth using
the app. The smartphone or tablet will be connected to the
presence detector via the integrated Bluetooth module.
Download thePixa Plug app from the App Store or Google
†
Play Store.
Open thePixa Plug app and press + in the menu bar.
†
▻ The device list of available devices appears.
Select the device and confirm with OK.
†
▻ If the smartphone/tablet is connected with the pre-
sence detector, the LED on the front of the presence
detector lights up green.
▻ Access to the detector can be protected with a pass-
word (
).
▻ If the password is no longer in your possession, follow
the instructions for resetting the password.
Settings (language, common pin),
software info, FAQ
Common pin: for each new presence
detector, the password of the first
detector will be suggested
Update
Edit: password, name
Delete
Search for new devices ...
Device list
5
Advertisement
Table of Contents
