Table of Contents
Advertisement
User Action:
Information only; no action is required
• FQXSPNM4001I: Ethernet Data Rate modified from [arg1] to [arg2] by user [arg3].
This message is for the use case where a user modifies the Ethernet Port data rate.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0003
User Action:
Information only; no action is required
• FQXSPNM4002I: Ethernet Duplex setting modified from [arg1] to [arg2] by user [arg3].
This message is for the use case where A user modifies the Ethernet Port duplex setting.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0004
User Action:
Information only; no action is required
• FQXSPNM4003I: Ethernet MTU setting modified from [arg1] to [arg2] by user [arg3].
This message is for the use case where a user modifies the Ethernet Port MTU setting.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0005
User Action:
Information only; no action is required
• FQXSPNM4004I: Ethernet locally administered MAC address modified from [arg1] to [arg2] by user
[arg3].
This message is for the use case where a user modifies the Ethernet Port MAC address setting.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0006
User Action:
64
ThinkSystem ST250 Messages and Codes Reference
Advertisement
Table of Contents
