Lenovo 7Y45 Instructions Manual page 169

Messages and codes reference
Hide thumbs Also See for 7Y45:
Table of Contents

Advertisement

• FQXSFPU4047I: TPM Firmware will be updated from TPM2.0 to TPM1.2.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4048I: A request was made to update the TPM 2.0 firmware to version 1.3.2.20.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4049I: TPM Firmware update successful.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4050G: Failed to update TPM Firmware.
Severity: Warning
User Action:
Complete the following steps:
1. Clear TPM via TPM operation and retry TPM firmware update by following the instructions in your
product user guides. Go to https://thinksystem.lenovofiles.com/help/topic/com.lenovo.thinksystem.
common.nav.doc/portfolio.html and click your product link. Usually, the TPM update information is
located in "System board replacement" section in "Hardware replacement procedures".
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU4051G: Undefined TPM_TCM_POLICY found
Severity: Warning
User Action:
Complete the following steps:
1. Reboot the system.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU4052G: TPM_TCM_POLICY is not locked
Severity: Warning
User Action:
Complete the following steps:
1. Reboot the system.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU4053G: System TPM_TCM_POLICY does not match the planar.
Severity: Warning
User Action:
Complete the following steps:
.
165
Chapter 3
UEFI events

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem st2507y46

Table of Contents