Table of Contents
Advertisement
• FQXSPSE4026I: Security: Userid: [arg1] had [arg2] login failures from a CIM client at IP address
[arg3].
This message is for the use case where a user has failed to log in to a Management Controller from CIM.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
SNMP Trap ID: 30
CIM Prefix: IMM CIM ID: 0140
User Action:
Information only; no action is required
• FQXSPSE4027I: Remote access attempt failed. Invalid userid or password received. Userid is
[arg1] from a CIM client at IP address [arg2].
This message is for the use case where a remote user has failed to establish a remote control session
from CIM.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
SNMP Trap ID: 30
CIM Prefix: IMM CIM ID: 0141
User Action:
Information only; no action is required
• FQXSPSE4028I: Security: Userid: [arg1] had [arg2] login failures from IPMI client at IP address
[arg3].
This message is for the use case where a user has failed to log in to a Management Controller from IPMI.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
SNMP Trap ID: 30
CIM Prefix: IMM CIM ID: 0153
User Action:
Information only; no action is required
• FQXSPSE4029I: Security: Userid: [arg1] had [arg2] login failures from SNMP client at IP address
[arg3].
This message is for the use case where a user has failed to access a Management Controller from SNMP.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
SNMP Trap ID: 30
CIM Prefix: IMM CIM ID: 0154
User Action:
.
Chapter 2
XClarity Controller events
119
Advertisement
Table of Contents
