Steps
1. Align the fan board tray to the guide pins on the system, slide the tray to the left of the system to lock it in place.
2. Tighten the captive screw to secure the fan board tray to the system.
Figure 34. Installing the fan board tray
Next steps
1. Connect the cables to the fan board.
2.
Install the cooling fan
3.
Install the air
shroud.
4. Follow the procedure listed in
Removing the cooling fan cage
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3.
Remove the air
shroud.
Steps
1. Lift the blue release levers to unlock the cooling fan cage assembly from the system.
2. Hold the release levers, and lift the cooling fan cage assembly away from the system.
90
Installing and removing system components
assembly.
After working inside your
Safety
instructions.
Before working inside your system
system.
.