Dell PowerEdge T560 Installation And Service Manual page 23

Table 7. Rear view of the system (continued)
Item
5
6
7
8
9
10
NOTE: For more information about ports, panels, and slots, see the
Ports, panels, or slots
VGA port
OCP NIC port (optional)
USB 2.0
USB 3.0
Dedicated iDRAC9 Ethernet
port
NIC ports (2)
Icon
N/A
N/A
Technical specifications
Dell PowerEdge T560 system overview
Description
access BIOS using the step
through mode. When pressed,
the system ID LED in the back
panel blinks until either the
front or rear button is pressed
again. Press the button to
toggle between on or off
mode.
Enables you to connect a
display device to the system.
The OCP NIC card supports
OCP 3.0. The NIC ports are
integrated on the OCP card
which is connected to the
system board.
Supports 4-pin, USB 2.0
compliant devices
Supports 9-pin, USB 3.0
compliant devices
Enables you to remotely
access iDRAC. For more
information, see the
Integrated Dell Remote
Access Controller User's
Guide at www.dell.com/
poweredgemanuals.
The NIC ports that are
integrated on the LOM card
provide network connectivity
which is connected to the
system board.
section.
23