Figure 124. Installing a NVME drive bay
Next steps
1.
Install the backplane to the drive
2.
Install the
drives.
3. Follow the procedure listed in
Optional optical drive
This is a service technician replaceable part only.
Removing the optical drive blank
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. If installed,
remove the front
Steps
Press the release tab and slide the optical drive blank out of the system.
172
Installing and removing system components
plane.
After working inside your
Safety
instructions.
Before working inside your system
bezel.
system.
.