Dell PowerEdge T560 Installation And Service Manual page 55

Table 44. Processor Settings details (continued)
Option
Dynamic SST-Performance Profile
SST-Performance Profile
Intel SST-BF
Intel SST-CP
x2APIC Mode
AVX ICCP Pre-Grant License
AVX ICCP Pre-Grant Level
Dell Controlled Turbo
Dell Controlled Turbo Setting
Dell AVX Scaling Technology
Number of Cores per Processor
CPU Physical Address Limit
AMP Prefetch
Description
heat the cooling system is must dissipate. This option is set to
Normal by default.
NOTE: This option is only available on certain stock keeping
units (SKUs) of the processors.
Enables you to reconfigure the processor using Dynamic or
Static Speed Select Technology. This option is set to Disabled
by default.
Enables you to reconfigure the processor using Speed Select
Technology.
Enables Intel SST-BF. This option is displayed if Performance Per
Watt (operating system) or Custom (when OSPM is enabled)
system profiles are selected. This option is set to Disabled by
default.
Enables Intel SST-CP. This option is displayed if Performance
Per Watt (operating system) or Custom (when OSPM is
enabled) system profiles are selected. This option is displayed
and selectable for each system profile mode. This option is set to
Disabled by default.
Enables or disables x2APIC mode. This option is set to Enabled
by default.
NOTE: For two processors 64 cores configuration, x2APIC
mode is not switchable if 256 threads are enabled (BIOS
settings: All CCD, cores, and logical processors enabled).
Enables or disables AVX ICCP Pre-Grant License. This option is
set to Disabled by default.
Enables you to select between the different AVX ICC transition
levels offered by Intel. This option is set to 128 heavy by
default.
Controls the turbo engagement. Enable this option only when
System Profile is set to Performance or Custom, and CPU
Power Management is set to Performance. This item can be
selected for each system profile mode. This option is set to
Disabled by default.
NOTE: Depending on the number of installed processors,
there might be up to two processor listings.
Enables you to configure the Dell AVX scaling technology. This
option is set to 0 by default. Enter the value from 0 to 12
bins. The value that is entered decreases the Dell AVX Scaling
Technology frequency when the Dell-controlled Turbo feature is
enabled.
Controls the number of enabled cores in each processor. This
option is set to All by default.
Limit CPU physical address to 46 bits to support older Hyper-V.
If enabled, automatically disables TME-MT. This option is set to
Enabled by default.
This option enables one of the Mid-Level Cache (MLC) AMP
hardware Prefetcher. This option is set to Disabled by default.
Pre-operating system management applications 55