Dell PowerEdge T560 Installation And Service Manual page 218

Figure 171. Set the anti-tilt wires to the locked position and tightening the nuts
Next steps
1. Install the air shroud.
2. Follow the procedure listed in
Optional OCP card
Removing the OCP card
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. Remove the air shroud.
Steps
1. Slide the OCP air shroud toward the front of the system and lift the OCP air shroud out of the system.
218 Installing and removing system components
After working inside your
Safety instructions.
Before working inside your system
system.
.