Dell PowerEdge T560 Installation And Service Manual page 222

Figure 177. Installing the OCP air shroud
Next steps
1. Install the air shroud.
2. Follow the procedure listed in
Optional serial COM port
This is a service technician replaceable part only.
Removing the serial COM port
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. Remove the air shroud.
4. Disconnect the cable connected to the serial COM port.
Steps
1. Open the blue latch and slide the serial COM port out of the system.
222 Installing and removing system components
After working inside your
Safety instructions.
Before working inside your system
system.
.