Dell PowerEdge T560 Installation And Service Manual page 206

Figure 158. Installing the GPU card holder
Next steps
1. Install the air shroud.
2. Follow the procedure listed in
GPU riser
Removing the GPU riser
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. Remove the air shroud.
Steps
1. Disconnect the cables from the GPU riser connected to the system board.
2. Loosen the captive screws and pull the GPU riser from the system.
206 Installing and removing system components
After working inside your
Safety instructions.
Before working inside your system
system.
.