Table of Contents
Advertisement
Figure 121. Removing a NVMe drive bay
Next steps
Replace the drive
bay.
Installing a drive bay
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3.
Remove the
drives.
4.
Remove the drive from the drive
Steps
1. Insert the drive bay into the drive bay slot in the system.
2. Using the Phillips #2 screwdriver secure the drive bay to the system.
NOTE:
The procedure to install the drive bays is similar for all configurations.
170
Installing and removing system components
Safety
instructions.
Before working inside your system
backplane.
.
Advertisement
Table of Contents
