Table of Contents
Advertisement
Table 19. PowerEdge XR5610 system storage controller specifications (continued)
Supported storage controller cards
● HBA355i
NOTE:
The XR5610 backplane support up to SAS3 speed only for SAS drives.
Drives specifications
ThePowerEdge XR5610 system supports 4 x 2.5-inch SAS, SATA, or NVMe SSD drives.
NOTE:
For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe
PCIe SSD User's Guide at
Infrastructure > Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Select This
Product > Documentation > Manuals and Documents.
NOTE:
Spinning hard drives are not supported in the XR5610.
Ports and connectors specifications
USB ports specifications
Table 20. PowerEdge XR5610 system USB ports specifications for Rear Accessed configuration
Front
USB port type
USB 2.0-compliant port
iDRAC Direct port (Micro-AB
USB 2.0-compliant port)
Table 21. PowerEdge XR5610 system USB ports specifications for Front Accessed configuration
Front
USB port type
USB 3.0-compliant port
iDRAC Direct port (Micro-AB
USB 2.0-compliant port)
NOTE:
The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port.
Display port specifications
The PowerEdge XR5610 system supports 1 x Mini-DisplayPort on the rear of the Rear Accessed configuration and on the front
of the Front Accessed configuration.
GPU specifications
The PowerEdge XR5610 system supports up to two 75 W/150 W (single-width, low-profile, and half-length) GPUs.
34
Technical specifications
https://www.dell.com/support
No. of ports
One
One
No. of ports
One
One
> Browse all products > Infrastructure > Data Center
Rear
USB port type
USB 3.0-compliant port
Rear
USB port type
None
No. of ports
One
No. of ports
Advertisement
Table of Contents
