Installing / removing and connecting analyzer and option modules
7.6 Installing ULTRAMAT 7, high-temperature version
7.6
Installing ULTRAMAT 7, high-temperature version
Overview
①
②
③
Figure 7-5
Procedure
1. Isolate the wall-mounted device from power.
2. Loosen the six screws
72
Wall-mounted device
Screw for door (6 units)
Screw for housing floor (8 units)
Installing ULTRAMAT 7, high-temperature
②
④
Analyzer module ULTRAMAT 7, high-temperature
version with module insulation
⑤
Flat seal
⑥
Equipotential bonding cable
and open the door.
Operating Instructions, 07/2023, A5E31930403-AB
Wall-mounted device