Connecting the device
8.1 Gas connections
Design of the gas connections
Dimensions of purging gas couplings
Diameter
Length
8.1.5
Connecting gas
8.1.5.1
Device with analyzer modules, standard version
Procedure
1. Connect the gas lines by means of suitable clamping ring screwed connections to the
associated gas inlets and outlets.
When tightening the union nuts at the screwed connections make sure that you counter
properly.
2. Check the clamping ring screwed connections for a tight fit and the pipe connections for
leaks.
8.1.5.2
Device with one OXYMAT 7 analyzer module, high-temperature version
Procedure
1. Connect the gas lines by means of suitable clamping ring connections to the associated gas
inlets and outlets.
When tightening the union nuts at the gas connection fittings, make sure that you counter
properly.
2. Check whether the clamping ring connections are connected firmly and check the pipe
connections for leaks.
102
Exterior
Without sealing caps
With sealing caps
Operating Instructions, 07/2023, A5E31930403-AB
12 mm
28 mm
41 mm
Wall-mounted device