Installing / removing and connecting analyzer and option modules
7.12 Wiring option modules
7.12
Wiring option modules
Overview
①
②
Figure 7-17
Note
ULTRAMAT 7: Deviating position of the OM2.x connections
With ULTRAMAT 7 analyzer modules the connector of the option module is not on the printed
circuit board but is on an additional circuit board. This is mounted horizontally at the upper end
of the analyzer module (see image of the ULTRAMAT 7 in paragraph Module structure, standard
version (Page 32)).
88
Analyzer module printed circuit board
Interface
Connecting option modules based on the example of an OXYMAT 7
Operating Instructions, 07/2023, A5E31930403-AB
Wall-mounted device