Connecting the device
8.1 Gas connections
ULTRAMAT 7 high-temperature: Arrangement of the gas connections in the wall-mounted device
①
②
③
Figure 8-4
Requirement on heated sample gas and reference gas lines
Note
Heated sample gas lines for analyzer modules, high-temperature version
The sample and reference gas must be fed to the analyzer module via heated external lines.
The figure below shows the dimensions of the heated gas line. The dimensions are specified
in millimeters.
98
4
3
2
1
Purging gas inlet
Purging gas outlet
Slot of analyzer module 1: ULTRAMAT 7 high-temperature
1
Sample gas inlet
2
Sample gas outlet
3
Reference gas outlet
4
Reference gas inlet
ULTRAMAT 7 gas connections high-temperature in the wall mounted device, bottom
Operating Instructions, 07/2023, A5E31930403-AB
Wall-mounted device