Advertisement
FILTERQUICK™ FQG80T/100T/120T GAS FRYER
CHAPTER 5: OPERATOR TROUBLESHOOTING
5.1
Introduction
This chapter provides an easy reference guide to some of the common problems that may occur
during the operation of your equipment. The troubleshooting guides that follow are intended to
help you correct, or at least accurately diagnose, problems with your equipment. Although the
chapter covers the most common problems reported, you may encounter problems that are not
covered. In such instances, the Frymaster Technical Services staff will make every effort to help you
identify and resolve the problem.
When troubleshooting a problem, always use a process of elimination starting with the simplest
solution and working through to the most complex. Most importantly, always try to establish a
clear idea of why a problem has occurred. Part of your corrective action involves taking steps to
ensure that it doesn't happen again. If a controller malfunctions because of a poor connection,
check all other connections. If a fuse continues to blow, find out why. Always keep in mind that
failure of a small component may often be indicative of potential failure or incorrect functioning of
a more important component or system.
If you are in doubt as to the proper action to take, do not hesitate to call the Frymaster Technical
Service Department or your local Frymaster Factory Authorized Servicer for assistance
Before calling a servicer or the Frymaster HOTLINE (1-800-551-8633):
• Verify that electrical cords are plugged in and that circuit breakers
are on.
• Verify that gas line quick-disconnects are properly connected.
• Verify that any gas line cutoff valves are open.
• Verify that frypot drain valves are fully closed.
• Have your fryer's model and serial numbers ready to give the
technician assisting you.
Hot oil will cause severe burns. Never attempt to move this appliance when filled with
hot oil or to transfer hot oil from one container to another.
This equipment should be unplugged when servicing, except when electrical circuit tests
are required. Use extreme care when performing such tests.
This appliance may have more than one electrical power supply connection point.
Disconnect all power cords before servicing.
Inspection, testing, and repair of electrical components should be performed by an
authorized service agent only.
DANGER
DANGER
5-1
.
Advertisement
