Advertisement
1. Between G20- and G25-type Natural Gas, adjust the gas pressure at the regulator. (Refer to the
CE Standard Burner Manifold Gas Pressure Chart.) Do not change the orifice.
nd
2. Between a 2
family (G20 or G25) and a 3
a. Change the orifices.
b. Adjust the manifold pressure.
3. Remove the old rating plate and return to Frymaster. Affix the new rating plate included with
the conversion kit in place of the old rating plate stating the gas has been converted.
4. If the destination language changes, replace the rating plate. Call your local service agency or
KES for a label kit. The language of reference will be on the corner of the label.
Conversions can only be executed by qualified, factory-authorized personnel.
Typical non-CE gas valve for electronic-ignition equipped fryers.
UKCA GAS CONVERSION INSTRUCTIONS
rd
family gas (G30 Butane or G31 Propane):
2-13
Advertisement
