Frymaster FilterQuick easyTouch FQG100T Installation, Operation And Maintenance Manual page 33

Reassembly
1. Using Figure 6 as a guide, place the inner insert screen between the filter screens and place
either stainless steel channel onto the screens by placing the small corner with the pin and
hinged channel over the other side (see Figure 7). Repeat with second channel. NOTE:
Channel must be put back starting with the comer pin.
Figure 6
2. Insert the assembly into the filter
envelope. The rough side of the
envelope should face up (see
Figure 8).
3. Ensure the fitting is lined up with
the opening and fold over the
envelope tab (see Figure 9).
4. Carefully screw the pickup tube
assembly onto
assembly (see Figures 10 and 11).
Figure 10
Figure 8
the filter leaf
Figure 11
Figure 7
3-9
Figure 9