Table of Contents
Advertisement
GOAL of EXAMPLE:
Change the MODEL TYPE and SWASH
TYPE of model #3 from aircraft to 120
degree CCPM with 2 servos working in
unison for collective pitch and aileron
[ HELI ( HR3 )].
Where next?
*
completion, the model type will not be changed.
STEPS:
Confirm you are currently using the
proper model memory. (example: 3)
Open PARAMETER submenu.
Select proper TYPE .
( HELICOPTER )
Change to the desired SWASH TYPE
Close.
If a single servo is not operating properly, REVERSE : see p. 35.
If a control is operating backwards (i.e. Elevator), see SWASH AFR , p. 75.
If unsure see SWASH AFR .
74
INPUTS:
On home screen, check model name and
# on top left.
If it is not the correct model (example:3),
see MODEL SELECT .
for 1 second.
to PARAMETER .
to TYPE .
to HELICOPTER .
Are you sure? displays.
to SWASH .
to HR3 .
for 1 second.
Are you sure? displays.
for 1 second.
1
Advertisement
Table of Contents
