Table of Contents
Advertisement
Aircraft wing types ( ACRO ):
There are 3 basic wing types in aircraft models:
This is the default setup and requires no specialized wing programming.
• Twin Aileron Servos. Model uses 2 aileron servos and has a tail. See Twin Aileron Servos.
ELEVON .
Twin Aileron Servos (with a tail) ( ACRO ): Many current generation models use two aileron servos, plugged into two
• Ease of assembly and more torque per surface by not requiring torque rods for a single servo to drive 2 surfaces.
• Set a negative percentage to reverse the operation of one of the servos.
Options:
• FLAPERON :
•Provides FLAP-TRIM
•Also allows aileron differential in its own programming (instead of activating AIL-DIFF ).
• Aileron Differential ( AIL-DIFF ):
•Allows for more up aileron travel than down for straighter rolls.
You will need to choose either of FLAPERON or AIL-DIFF
Many other setup examples are also available at this site.)
GOAL of EXAMPLE:
Deactivate FLAPERON so that AIL-DIFF or
ELEVON can be activated.
Where next?
FLAPERON
FLAPERON , AIL-DIFF , and ELEVON ) can be used at a time. All three
STEPS:
Open the FLAPERON function.
Deactivate the function.
Close function.
Set up AILE-DIFF (see p. 52) or ELEVON (see p. 53).
ELEVON , p. 53.)
AIRBRAKE . (see p. 61).
INPUTS:
for 1 second.
to FLAPERON .
to MIX .
49
AIL-DIFF is probably
to INH .
Advertisement
Table of Contents
