Table of Contents
Advertisement
GYA gyro mixing
integrated sensor and control circuit make them easy to mount.
• GYA350: for airplane aileron, elevator, or rudder.
• GYA351: for airplane ailerons, especially two servos such as when using FLAPERON .
• GYA352: for airplane aileron, elevator, or rudder control. Two of these surfaces (axis) can be controlled by GYA352.
input is performed automatically by the gyro.
• When the servo hunts, the gyro gain is too high. Lower the gain until the hunting stops.
repeatedly.
Precautions:
necessary when turning because the weathervane effect is lost. Use the gyro in the Normal mode unless you are an expert
in rudder operation.
• And we recommend that you also set to off (0%) mode for safety as follows.
GOAL of EXAMPLE:
Set up a GYA gyro setting.
Adjustability:
(selectable)
NOR : Normal mode gain. AVC
• Larger percentages indicate more gain, or gyro responsiveness.
• Gyro type selectable. GY
STEPS:
Open and activate the GYRO SENSE
function.
Activate the function.
Change channel assignment. Ex: select
CH5 / CH7 / CH8 .
Change gyro type. Ex: select GY .
Optional: change switch assignment.
Ex: select E .
Adjust gyro rates as needed. (Ex: UP
to NOR70% , CNTR to 0% (off) , DOWN to
AVC70% as starting points.)
Close menu.
70
SWITCH A-H)
STD : Other than GYA gyros
INPUTS:
for 1 second.
to GYRO SENSE .
to MIX .
to CH .
to type .
to SW .
to UP / CNTR / DOWN .
to rate .to
AVC70% . ("+" for AVC "-" for NOR)
to ON .
to CH5 / CH7 / CH8 .
to GY .
to E .
NOR70%/ 0% /
Advertisement
Table of Contents
