Table of Contents
Advertisement
SUB-TRIM
the default being no SUB-TRIM .
The recommended procedure is as follows:
• zero out both the trims ( TRIM RESET menu) and the SUB-TRIMs
• use a small amount of SUB-TRIM
GOAL of EXAMPLE:
its center exactly matches the aileron
Where next?
We recommend that you center the digital trims before making SUB-TRIM
changes, and that you try to keep all of the SUB-TRIM values as small as
possible. Larger SUB-TRIM
restricted on one side.
STEPS:
SUB-TRIM until
Open SUB-TRIM .
Choose the channel to adjust, and adjust
the values until the surfaces match. (Ex:
Repeat the other channel values.
Close.
Adjust trim steps: see p. 45.
Adjust END POINTs : see p. 36.
Set up dual/triple rates and exponential( D/R , EXP ): see p. 39.
46
INPUTS:
for 1 second.
to SUB-TRIM .
to FLP
as needed.
to each channel,
as needed.
Advertisement
Table of Contents
