Nespresso Momento 100 Service Manual page 38

Troubleshooting > Display Messages (Errors)
Warning
Maintenance warning
Maintenance warning
Maintenance warning
Error code 0001
Error code 0002
Error code 0003
Error code 0005
Error code 0006
Error code 0007
Error code 0008
Error code 0009
Error code 0010
Error code 0011
Error code 0012
Error code 113
38 Momento Service manual
Direct water connection issue: please
contact your maintenance
Warning: Machine service to be
performed. Please contact machine
operator.
Warning: Please clean the water tank. Please clean the water tank as described in the user
Warning: Please clean the water tank
Coffee Main communication not
working
MHBU communication not working
Chassis communication not working
Coffee main extraction interrupted
due to an error
Error on Coffee Main: <number>
Invalid video data
Milk not available
Unknown error on Coffee Main (error
not reported)
Battery voltage is low
Protocol version mismatch
Power grid issue
Flow detected during priming
Is there an issue and the water is overflowing? (DWC
valve is defective and water tank is overflowing) -->
Water is constantly flooding into the water tank (user
can open the door and check that) + presence of
water in the tank slot. If yes, close the water input.
Is there an issue and the water tank is empty?
Check if DWC external kit valve is open.
Remove water tank and clean it (it is possible that
the water tank level sensor value indicates to the
DWC that the water tank is full).
Please contact your machine operator to arrange
machine maintenance
manual
Clean water tank daily to remove dried water
deposits
Ask the user to switch on/off the machine. If problem
persists, technician is needed
Ask the user to switch on/off the machine. If problem
persists, technician is needed
Ask the user to switch on/off the machine. If problem
persists, technician is needed
Send technician to replace lithium battery
Version 0.1 EN