Nespresso Momento 100 Service Manual page 103

Repair > Coffee Module repairs > Replace complete brewing unit (MHBU)
4. Release the flat receptacle of the ground wire at the thermoblock (C24, location
circled in red).
This kind of flat receptacle has a special connector latching.
Press down the lever with flat nose pliers while pulling on it.
5. Unplug 2 connectors (see detail) from the main PCB (C17):
(a) MHBU connector
(b) MHBU power connector
6. Pull the wires out of guides and wire saddles (C05).
Version 0.1 EN
C24
C17
Momento Service manual
Fig. 87
103