Table of Contents
Advertisement
Slot (e) is used as interface to program or update the smart PCB (B34/A40).
B15/A18
B34/A40
3. Unplug the flat receptacle of the grounding wire from the top plate (B15/A18).
This kind of flat receptacle has a special connector latching.
Press down the lever with flat nose pliers while pulling on it.
1. Unplug all connectors from the back of the smart PCB (B34/A40):
(a) Access point PCB connector
(b) Drip tray contact connector
(c) Extension PCB connector (Momento 200 only)
(d) Water level detection connector
2. Replace the smart PCB (B34/A40).
Assembly tip
• Make sure that the connector latch of the grounding wire is locked by slightly
pulling it down.
Version 0.1 EN
Repair > Chassis repairs > Replace smart PCB
Momento Service manual
Fig. 45
69
Hide quick links:
Advertisement
Table of Contents
