Nespresso Momento 100 Service Manual page 71

Repair > Chassis repairs > Replace extension PCB (Momento 200 only)
B15
B42
3. Unplug the flat receptacle of the grounding wire from the top plate (B15).
This kind of flat receptacle has a special connector latching.
Press down the lever with flat nose pliers while pulling on it.
4. Unplug all connectors from the back of the extension PCB (B42):
(a) Smart PCB connector
(b) Water level detection connector for 2nd tank
5. Replace the extension PCB (B42).
Assembly tip
• Make sure that the connector latch of the grounding wire is locked by slightly
pulling it down.
Version 0.1 EN Momento Service manual
Fig. 48
71