Nespresso Momento 100 Service Manual page 73

Repair > Chassis repairs > Replace PTC heaters (cup heating)
2. Turn the machine upside down for easier access to the PTC heaters (B18/A21).
3. Loosen 2 screws (TX20) with washers per PTC heater support (B19/A22).
4. Remove the PTC heater supports (B19/A22).
5. Replace the PTC heaters (B18/A21).
Assembly tip
• Turn in screw (a) first, then turn in screw (b) into the long slot.
Version 0.1 EN
B19/A22
B18/A21
Momento Service manual
It is not necessary
to turn the machine
upside down if you
cannot, but it makes
repair work on the
heaters a lot easier.
Fig. 50
Fig. 51
73