Nespresso Momento 100 Service Manual page 28

If machine is reset
to factory settings,
all customised settings
will be lost!
28
MMI Menus > Setup menu
Set water hardness
1. Prepare items as instructed. After
1 minute in water, the test strip is
coloured.
3. Adjust the bottom ring on the
water filter to "A", "B" or "C" as
recommended.
Reset to factory settings
reset to factory se ings
you will reset the
machine to its factory
se ings
1. Select "yes" to reset the machine to
its factory settings. To cancel, select
"no" or tap on "cancel" symbol.
Momento Service manual
water filter installation
a er 1 minute select the
colour of your test strip
2. Tap on "A", "B" or "C" symbol to
match the colour of your test strip.
Tap on "next" symbol to proceed.
yes
no
Version 0.1 EN