Be cautious not
to lose the square
nuts countering the
screws on the cross
beam.
78
Repair > Coffee Module repairs > Remove head base plate
6. Loosen one screw (TX20) on the cross beam (C69) and on the chassis BU (C01).
7. Do the same on the other side of the coffee module.
8. Remove the head base plate (C33) by pulling it away on the coffee module handle
(C70).
Assembly tips
• Make sure that the cross beam (C69) screws are countered with a square nut.
• Always replace the O-ring (C81) seated between the valve (C78) and hose adapt-
ers (C80).
Momento Service manual
C69
C70
C33
C01
Version 0.1 EN
Fig. 56