Nespresso Momento 100 Service Manual page 94

94
Repair > Coffee Module repairs > Replace pump
a C10
C08
C88
C18
3. Pull the wires out of the guides and wire saddles (C05).
4. Pull off the upper low pressure hose (C88) from the flowmeter (C18).
5. Pull out the connector clip (a) from the pump connector (C10, see detail) with
pointed pliers.
6. Pull off and discard the O-ring (C12) between pressure hose and pump connector
(C10).
7. Slide the pump (C08) out of chassis BU (C01).
Assembly tips
• Always replace the O-ring (C12) seated between pump connector (C10) and pres-
sure hose.
• Do not twist or fold the pressure hose (C88) to the flow meter (C18) – water must
be able to flow free of resistance.
Momento Service manual
C12
C01
Fig. 73
Version 0.1 EN