Basic Operations for Sending Faxes
This section describes the basic operation procedure used to fax an original.
●
You need to complete some procedures before using fax functions.
Functions(P. 78)
1
Place the original(s).
2
Select <Fax> in the Home screen.
●
When the login screen appears, enter your user name and password and set up the authentication server.
Logging in to Authorized Send(P. 129)
3
Select <Reset> in the Fax Basic Features screen.
●
If the destinations set by the previous user are still selected, this can cause transmission errors. Always reset
the settings before sending.
4
Specify the destination.
Specifying from Address Book
Specifying from Coded Dial Numbers
Entering Destinations Directly
Specifying Destinations in an LDAP Server
Specifying from Address Book
●
You need to register destinations in the Address Book before using this feature.
Destinations(P. 186)
1
Select <Address Book>.
Faxing
Placing Originals(P. 130)
Home Screen(P. 117)
The Address Book enables you to specify a destination by selecting from a list of
registered destinations or by searching by name for destinations with recipient
names.
227
Configuring Initial Settings for Fax
Fax Basic Features Screen(P. 226)
Registering
6C6U-04F