#401
A scanned original could not be stored to a USB memory device due to insufficient memory space.
●
Delete unnecessary data to free space in the USB memory device, or connect a different USB memory
device.
Connecting a USB Memory Device(P. 100)
#406
A scanned document could not be stored to a USB memory device due to an error.
●
Remove the USB memory device, and connect it again.
Connecting a USB Memory Device(P. 100)
●
Reduce the number of originals to scan.
#408
Read failed because the USB memory device was removed while data was being read from it.
●
Check that the USB memory device has not been removed and then read the data again.
Connecting a USB Memory Device(P. 100)
Printing from a USB Memory Device (Memory Media Print)(P. 279)
The connected USB memory device is using an unsupported format.
●
Check that the USB memory device is using a format supported by this machine.
Connecting a USB Memory Device(P. 100)
#701
Authentication failed because an incorrect Department ID or PIN was entered when the Department ID
Management was activated.
●
Enter the correct Department ID and PIN.
Continuing operating without entering a Department ID was attempted even though unknown-ID jobs
(functions that permit operations without a Department ID and PIN) were disabled in the Department ID
Management.
●
Enable unknown-ID jobs in System Manager Mode in Remote UI.
Blocking Jobs When Department ID Is Unknown(P. 378)
#703
Data could not be written because the memory space that was allocated for images was full when
sending an e-mail/I-Fax or storing to a shared folder/FTP server.
●
If another sending document is queued, wait for a while until it is completed, and send again.
Troubleshooting
688