Table of Contents
Advertisement
Loading Envelopes
Load envelopes in the paper drawer or the multi-purpose tray. Make sure to flatten any curls on envelopes before
loading them. Also pay attention to the orientation of envelopes and which side should be face up.
Before Loading Envelopes(P. 144)
Loading the Envelopes in the Paper Drawer(P. 146)
Loading Envelopes in the Multi-Purpose Tray(P. 149)
●
This section describes how to load envelopes with the proper orientation, as well as procedures that you
need to complete before loading envelopes. For a description of the general procedure for loading
envelopes in the paper drawer or multi-purpose tray, see
Before Loading Envelopes
Follow the procedure below to prepare the envelopes before loading.
●
Do not use envelopes that have glue attached to their flaps, as the glue may melt due to the heat and
pressure of the fixing unit.
●
Wrinkles may occur depending on the type of envelopes or the storage environment for the envelopes.
1
Flatten any curls.
●
Pick up about five envelopes. Flatten any curls, and loosen the stiff areas in the four corners.
Basic Operations
Basic Paper Loading Method(P. 138) .
144
6C6U-02S
Advertisement
Table of Contents
