Table of Contents
Advertisement
<Enter Manually>
Select to configure a wireless connection by manually entering an SSID. By using this method, you can specify
authentication and encryption settings in detail.
Settings(P. 26)
<Security Settings>
<None>
<WEP>
<Open System>
WEP Key 1 to 4
<Shared Key>
WEP Key 1 to 4
<WPA/WPA2-PSK>
<Auto>
<AES-CCMP>
<WPS Push Button Mode>
Select to automatically configure a wireless connection by using the button on a WPS wireless router.
Up Connection Using WPS Push Button Mode(P. 19)
<WPS PIN Code Mode>
Select to configure a wireless connection by entering a PIN code for a WPS wireless router.
Connection Using WPS PIN Code Mode(P. 21)
<Power Save Mode>
Select whether or not the machine enters Power Save Mode based on signals emitted from the wireless router.
<Off>
<On>
<Menu>
message
<Connection Information>
Select to view the current wireless LAN settings.
<MAC Address>
<Wireless LAN Status>
<Latest Error Information>
<Channel>
<SSID Settings>
<Security Settings>
<Power Save Mode>
<Direct Connection Settings>
Set whether to connect directly. By enabling this function, connecting directly with the machine is possible even in an
environment without an access point or wireless LAN router.
Setting Menu List
<Preferences>
<Network>
<OK>
<Power Save Mode>
*1
Setting Up Connection by Specifying Detailed
<Wireless LAN Settings>
Select <Off> or <On>
Viewing Network Settings(P. 37)
Connecting Directly (Access Point Mode)(P. 344)
479
Setting
Setting Up
Read the displayed
Advertisement
Table of Contents
