Paper Jams in the Inner Finisher
1
Open the right cover of the main unit.
2
Check whether paper is jammed in output tray of the finisher.
●
If paper is jammed, gently pull it out in the direction of the arrow.
●
When you are using the Staple mode, do not remove the current stack of printouts from the output tray
before it is stapled. After the paper jam clearing operation is finished, the following printouts will add to
the current stack.
3
Check whether paper is jammed in the output area or reversing unit.
●
If paper is jammed, gently pull it out in the direction of the arrow.
Troubleshooting
712
6C6U-0C9