12
Restart the machine.
●
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Using the operation panel
●
You can also enable or disable TLS encrypted communication from <Menu> in the Home screen.
UI>(P. 592)
Starting the Remote UI with TLS
●
If you try to start the Remote UI when TLS is enabled, a security alert may be displayed regarding the
security certificate. In this case, check that the correct URL is entered in the address field, and then proceed
to display the Remote UI screen.
Using TLS to encrypt e-mail/I-Fax communication
●
If the SMTP server and the POP3 server support TLS, you can enable TLS for communication with these
servers (
Configuring E-Mail/I-Fax Communication Settings(P. 86) ). For more information about the
SMTP server and the POP3 server, contact your Internet service provider or Network Administrator.
LINKS
Generating the Key and Certificate for Network Communication(P. 400)
Generating a Key and Certificate Signing Request (CSR)(P. 403)
Registering the Key and Certificate for Network Communication(P. 406)
Configuring IPSec Settings(P. 408)
Configuring IEEE 802.1X Authentication Settings(P. 415)
Monitoring and Controlling the Machine with SNMP(P. 68)
Registering LDAP Servers(P. 63)
Managing the Machine
Starting Remote UI(P. 436)
399
<Remote