Table of Contents
Advertisement
<Redial Interval>
Specifies the interval between redials. Enter a number for the interval, and select <Apply>.
<Redial When Error Occurs>
When set to <On>, specifies to redial when a transmission error occurs.
<Check Dial Tone Before Send>
Select whether to check the dial tone before a fax number is dialed.
<Off>
<On>
<Menu>
<Function Settings>
Send>
<On>
<Set Line>
Specify a fax number, unit name, and line type.
<Register Unit Tel. Number>
Register the fax number for the machine.
<Register Unit Name>
Register the name of a company or person (
registered name is sent as sender information to the destination (
*2
<Select Line Type>
Select the telephone line type used for fax transmission.
<Select Line Type (Manual)>
<Pulse>
<Tone>
<Rotate Img to Send(Long Edge)>
Select whether to rotate the original that is set sideways by 90 degrees and send automatically.
<Off>
<On>
<Menu>
<Function Settings>
Edge)>
Select <Off> or <On>
<TX Start Speed>
If it takes time to start sending originals, such as when there is a poor connection, you can adjust the
transmission start speed downward incrementally.
<33600 bps>
Setting Menu List
*2
<Send>
<Fax Settings>
Registering the Fax Number and Unit Name(P. 80)
Registering the Fax Number and Unit Name(P. 80) ). The
Connecting the Telephone Line(P. 82)
<Send>
<Fax Settings>
566
<Check Dial Tone Before
<TX Terminal ID>(P. 568) ).
<Rotate Img to Send(Long
Advertisement
Table of Contents
