Table of Contents
Advertisement
Adjusting Print Quality
If the printing results are not satisfactory such as low image quality, poor reproducibility, or print color mismatch, try
the adjustments below.
◼
Auto Adjust Gradation
If the density or brightness of colors in printouts and originals are different, perform <Auto Adjust Gradation> to
improve color reproducibility. There are two types of adjustments: <Full Adjust>, <Quick Adjust>.
Gradation(P. 632)
◼
Shading Correction
If the image areas of the printing have uneven density, this correction adjusts the printing so that the density is even.
Correcting Uneven Density(P. 636)
◼
Correct Print Color Mismatch
If the colors in printouts become blurry, perform <Correct Print Color Mismatch>. This problem may be caused by a
color mismatch.
Correcting "Print Color Mismatch"(P. 640)
◼
Black Text Processing for Color
You can specify which cartridges to use to print black text in color printouts.
Reproducibility in Color Documents(P. 641)
◼
Toner Amount Reduction
You can prevent excessive toner from being fixed onto paper to reduce print failure such as poor toner fixing or bleed-
through.
Troubleshooting(P. 654)
◼
Unevenness correction of filling
Adjust the unevenness when uneven filling occurs with the original with many filled parts.
Problems(P. 655)
Maintenance
631
Adjusting
Adjusting Values for Text Color
Common
6C6U-0A8
Advertisement
Table of Contents
