Table of Contents
Advertisement
Cleaning the Feeder
If streaks appear on originals fed through the feeder, or if smudges appear on printouts, or if a paper jam occurs
frequently, then perform feeder cleaning.
Cleaning the Feeder(P. 605)
If Streaks Still Appear On Paper(P. 608)
Cleaning the Feeder
1
Turn the power OFF, and remove the power plug from the power outlet.
Turning OFF the Machine(P. 112)
●
Check the operation status of the machine before turning the power OFF. You can turn the power OFF
even if the machine is executing an operation, but this may cause the operation to be interrupted or data
to become damaged.
2
Pull the lever, and open the feeder cover.
3
Clean the rollers inside the feeder cover.
●
Wet a soft cloth with water and wring it out well, then wipe the rollers with it. Afterwards, wipe the rollers
with a soft and dry cloth.
Maintenance
605
6C6U-09X
Advertisement
Table of Contents
