Table of Contents
Advertisement
No reply from the destination.
A network cable may be disconnected, or there may be a problem in a switch.
●
Check the status of the network cables and switches.
No response from the host.
The machine is not connected to a network correctly.
●
Check the machine and network settings, and connect again.
Setting Up the Network Environment(P. 13)
Paper jammed.
Paper jams.
●
Remove the jammed paper, and print again (Printing may resume automatically).
Clearing Paper Jams(P. 696)
Paper Settings and Loaded Size Mismatch
The paper size setting on the operation panel does not match the loaded paper size.
●
Match the paper size setting specified in <Paper Settings> and the size of the paper that is actually loaded.
To use the loaded paper
Change the setting of <Paper Settings> to match the loaded paper size.
Specifying Paper Size and Type(P. 155)
●
If printing from a computer, check whether the paper size setting in the printer driver matches the loaded
paper size.
To load paper without changing the settings
Load the paper with the size that is set to <Paper Settings>.
Loading Paper(P. 136)
●
Check that the paper guides in the paper drawer are set in the correct position.
Loading Paper(P. 136)
Printing is restricted.
Printing is disabled in the Department ID Management.
●
Log in with a Department ID for which printing is not disabled. For the Department ID and PIN, contact
your Administrator.
Troubleshooting
681
Advertisement
Table of Contents
