●
Move the slide guides inward until they are aligned securely against the edges of the original.
➠
Originals are ready for scanning.
Align the slide guides securely against the edges of the original
●
Slide guides that are too loose or too tight can cause misfeeds or paper jam.
While originals are being scanned
●
Do not add or remove originals.
When scanning is complete
●
Remove the scanned originals from the original output tray to prevent paper jams. To prevent originals
from being left in the original output tray, the original output indicator lights while the originals are being
output, and blinks for a while after all the originals have been output.
When scanning long strip originals
●
If you scan long originals (which have a length of up to 630 mm), support the originals by hand when
scanning and outputting paper.
Basic Operations
134