Table of Contents
Advertisement
[User Name Attribute]
Enter the attribute name, to be compared with a user name entered during authentication, of alphanumeric
characters (Example: "sAMAccountName").
●
Not required if [Use (Security Authentication)] is selected in [Login Information].
[E-Mail Address Attribute]
Enter the attribute name, to be used for obtaining an e-mail address from the authentication server, of
alphanumeric characters (Example: "mail").
[Login Information]
Select [Use] or [Use (Security Authentication)] depending on the type of authentication implemented by the
LDAP server.
[Use]
[Use (Security Authentication)]
[Use System Manager ID]
If [Use] is selected in [Login Information], this specifies whether authentication using the system manager ID is
used. To use the system manager ID, select the check box and specify the user name and password for used for
authentication. If you deselect the check box, login is anonymous (no user name).
[User Name]
Enter the user name of the machine that was registered to the LDAP server in the form "(domain name)\(user
name)" (example: domain1\user1).
[Set/Change Password]
To specify or change the password, select the check box and enter alphanumeric characters in the [Password]
text box.
[Domain Name]
When [Use (Security Authentication)] is selected for [Login Information], enter alphanumeric characters for the
directory tree name in Active Directory (example: example.com).
[Confirm TLS Certificate for LDAP Server Access]
Select the check box to verify the certificate when encrypting communication with the LDAP server using TLS.
Also, select the [Add CN to Verification Items] check box as necessary.
6
Click [OK].
LINKS
Configuring SNTP(P. 72)
Basic Operations for Sending Faxes(P. 227)
Basic Operations for Scanning Originals(P. 294)
LDAP Server Authentication(P. 381)
Setting Up
Select to authenticate the machine using the System Manager ID.
Select to use data obtained by Kerberos, a network authentication protocol, for the
authentication password. If this setting is selected, the clock of the machine needs to be
synchronized with that of the LDAP server.
67
Advertisement
Table of Contents
