Table of Contents
Advertisement
Scanning the 2-Sided Originals
●
The machine cannot automatically scan both sides of the original placed on the platen glass.
<2-Sided Original>
<Book Type>
Select for originals whose images on the front and back sides face the same direction.
<Calendar Type>
Select for originals whose images on the front and back sides face in opposite directions.
●
For information about other scan settings, see
between File Size and Image Quality(P. 323) .
5
Select <Start>.
➠
Scanning of the original starts.
●
If you want to cancel, select <Cancel>
When placing originals in the feeder in step 1
When scanning is complete, the saving process starts.
When placing originals on the platen glass in step 1
When scanning is complete, follow the procedures below (except if you selected JPEG as a file format).
1
If there are additional pages of originals to be scanned, place the next original on the platen glass, and
select <Scan Next>.
●
Repeat this step until you finish scanning all of the pages.
●
When there is only one page to be scanned, proceed to the next step.
Scanning
The machine can automatically scan the front and back sides of originals in the feeder.
Select <Book Type> or <Calendar Type>
Scanning Clearly(P. 313)
<Yes>.
Canceling Sending Documents(P. 310)
299
or
Adjusting Balance
Advertisement
Table of Contents
