Table of Contents
Advertisement
To scan tracing paper or transparencies
●
To scan transparent originals (for example, tracing paper or transparencies), place them on the platen glass
and cover them with plain white paper.
Document sizes
●
The machine automatically detects the paper size of the placed document prior to scanning. In the case of
fax sending, if the size of the recording paper in the recipient's machine is smaller than the scanned
document size, the original image may be either reduced in size or divided into smaller parts before it is
sent.
Placing Originals on the Platen Glass
1
Open the feeder or the platen cover.
●
If you place an original for which the opening of the feeder is insufficient, the size of the original may not
be properly detected.
2
Place the original face down on the platen glass.
●
Align the corner of the original with the top-left corner of the platen glass.
●
When copying 2-sided original, place the original so that the top and the bottom are properly positioned,
as shown in the illustration below.
Basic Operations
131
Advertisement
Table of Contents
